Indicative specifications of solar pumping systems

Indicative Technical Specifications of Shallow Well (Surface) Solar Pumping Systems

With D.C. Motor Pump Set with Brushes or Brush Less D.C. (B.L.D.C.)
With A.C. Induction Motor Pump Set and a suitable Inverter:

Indicative Technical Specifications of Solar Deep well (submersible) Pumping Systems

With D.C. Motor Pump Set with Brushes or Brush Less D.C. (B.L.D.C.)
With A.C. Induction Motor Pump Set and a suitable Inverter

Indicative Technical Specifications of Shallow Well (Surface) Solar Pumping Systems

With D.C. Motor Pump Set with Brushes or Brush Less D.C. (B.L.D.C.)

Description	Model -I	Model-II	Model-III
PV array	900 Wp	1800 Wp	2700 Wp
Motor capacity	1 HP	2 HP	3 HP
Shut Off Dynamic Head	12 metres	15 metres	25 metres
Module mounting structure	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities
Water Output *	90,000 litres per day from a total head of 10 metres	180,000 litres per day from a total head of 10 metres	148,000 litres per day from a total head of 20 metres

* Water output figures are on a clear sunny day with three times tracking of SPV panel, under the “Average Daily Solar Radiation” condition of 7.15 KWh/ sq.m. on the surface of PV array (i.e. coplanar with the PV Modules).

Notes:

Suction head, if applicable, minimum 7 metres.
For higher or lower head / PV capacity, or in between various models; water output could be decided as per the Performance specifications and requirements.
If submersible pumps are used in lieu of surface pumps, the water output must match that of the surface pumps as specified in this table.

With A.C. Induction Motor Pump Set and a suitable Inverter:

Description	Model -I	Model-II	Model-III
PV array	900 Wp	1800 Wp	2700 Wp
Motor capacity	1 HP	2 HP	3 HP
Shut Off Dynamic Head	12 metres	15 metres	25 metres
Module mounting structure	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities
Water Output *	81,000 litres per day from a total head of 10 metres	162,000 litres per day from a total head of 10 metres	135,000 litres per day from a total head of 20 metres

Notes:

Suction head, if applicable, minimum 7 metres.
For higher or lower head / PV capacity, or in between various models; water output could be decided as per the Performance specifications and requirements.
If submersible pumps are used in lieu of surface pumps, the water output must match that of the surface pumps as specified in this table.

Indicative Technical Specifications of Solar Deep well (submersible) Pumping Systems

With D.C. Motor Pump Set with Brushes or Brush Less D.C. (B.L.D.C.)

Description	Model -I	Model-II	Model-III	Model-IV
PV array	1200 Wp	1800 Wp	3000 Wp	4800 Wp
Motor pump set type	Submersible with electronic controller	Submersible with electronic controller	Submersible with electronic controller	Submersible with electronic controller
Max. total dynamic head	45 metres	45 metres	70 metres	70 metres
Module mounting structure	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities
Water Output *	42,000 litres per day from a total head of 30 metres	63,000 litres per day from a total head of 30 metres	63,000 litres per day from a total head of 50 metres	1,00,000 litres per day from a total head of 50 metres

Notes

For higher or lower head / PV capacity, or in between various models; water output could be decided as per the Performance specifications and requirements.
If surface pumps are used in lieu of submersible pumps, the water output must match that of the submersible pumps as specified in this table

With A.C. Induction Motor Pump Set and a suitable Inverter

Description	Model -I	Model-II	Model-III	Model-IV
PV array	1200 Wp	1800 Wp	3000 Wp	4800 Wp
Motor pump set type	Submersible with electronic controller	Submersible with electronic controller	Submersible with electronic controller	Submersible with electronic controller
Max. total dynamic head	45 metres	45 metres	70 metres	70 metres
Module mounting structure	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities	MS hot dipped galvanised, at least three times manual tracking facilities
Water Output *	38,000 Litres per day from a total head of 30 mtrs	57,000 litres per day from a total head of 30 mtrs	57,000 litres per day from a total head of 50 metres	91,000 litres per day from a total head of 50 metres

Notes

For higher or lower head / PV capacity, or in between various models; water output could be decided as per the Performance specifications and requirements.
If surface pumps are used in lieu of submersible pumps, the water output must match that of the submersible pumps as specified in this table.

Source: Ministry of New and Renewable Energy

Last Modified : 3/2/2020

0 ratings and 0 comments

Your Rating

Roll over stars then click to rate.

© C–DAC.All content appearing on the vikaspedia portal is through collaborative effort of vikaspedia and its partners.We encourage you to use and share the content in a respectful and fair manner. Please leave all source links intact and adhere to applicable copyright and intellectual property guidelines and laws.